舒谦,唐杰,陈春刚,肖锋,沈学顺,周立隆,李泽椿,朱克云,李兴良. 2020. 高阶正定守恒的中心约束多矩有限体积平流模式[J]. 气象学报, (0):-, doi:10.11676/qxxb2020.039
高阶正定守恒的中心约束多矩有限体积平流模式
High order Positive-definite Conservative Multi-moment Center Constrained Finite Volume Transport Model
投稿时间:2019-11-16  修订日期:2020-01-21
DOI:10.11676/qxxb2020.039
中文关键词:  平流方案,多矩有限体积法,正定守恒,高精度方案
英文关键词:advection scheme,multi-moment finite volume method,positive-definite and conservation,high order scheme
基金项目:
作者单位E-mail
舒谦 成都信息工程大学 516189471@qq.com 
唐杰 国家气象中心 tangjiecd@163.com 
陈春刚 西安交通大学 cgchen@xjtu.edu.cn 
肖锋 日本东京工业大学 xiao.f.aa@m.titech.ac.jp 
沈学顺 国家气象中心 shenxs@cma.gov.cn 
周立隆 国家气象中心 dwyanechou@qq.com 
李泽椿 国家气象中心 lizc@cma.gov.cn 
朱克云 成都信息工程大学 zhuky@cuit.edu.cn 
李兴良 国家气象中心 lixliang@cma.gov.cn 
摘要点击次数: 146
全文下载次数: 46
中文摘要:
      本文采用新的均匀三点中心约束多矩有限体积方法(MCV3_UPCC: 3-point Multi-moment Constrained finite-Volume scheme for Uniform Points with Center Constraints),[目的]发展了一个三阶正定守恒的平流模式。三点多矩有限体积方法在单网格内定义等距的三个自由度,采用多矩约束条件并通过控制方程获得时间演变方程。[方法]新的三点中心约束多矩方法能在单网格内采用等距的三个点值及中心一阶、二阶导数作为约束条件进行空间四次多项式数值重构,获得三个自由度的时间演变方程;所构建的新数值方案具有三阶精度,边界通量连续性保证了其数值严格守恒。为了抑制该方法的非物理数值振荡,引入了边界保型(BP: Bound-Preserving)限制器技术,它能够把数值解控制在既定物理场最小值(最小值为零时则保持数值正定)与最大值之间。[结果和结论]数值试验表明新发展的三阶平流模式具有良好的计算精度,能够严格保持数值解的正定性和守恒性,同其他高精度平流模式相当,在实际大气模式水汽等平流输送应用中具备良好的发展潜力。
英文摘要:
      A two dimensional 3rd order positive-definite conservative advection model by a novel 3-point multi-moment constrained finite-volume scheme for uniform points with center constraints (MCV3_UPCC) is developed in this paper. In the context of 3-point multi-moment finite volume method, three equidistant solution points are defined within a single cell and the time evolution equations can be obtained by flux form formulation. The multi-moment constraints in this novel scheme are imposed at the cell center on the point value, the first and second order derivatives, then a polynomial of 4th degree can be reconstructed in a single cell. The resulting MCV3_UPCC scheme has 3rd order accuracy and assure the exact numerical conservation due to the continuity of the flux function at cell interfaces. To suppress the numerical oscillations and the positivity of certain physical quantities, the bound-preserving limiting projection is introduced into the new MCV3_UPCC scheme, which satisfies the minimum and maximum principle. The new positive-definite conservative advection model is validated by the widely used benchmarks. The presented transport model has a good accuracy in comparison with the existing other high-order models, and it has the potential to be applied in the real moist transport model.
查看全文   查看/发表评论  下载PDF阅读器
分享按钮